Garage Door Opener Installation
Belt, chain and jackshaft openers sized to the door, with safety eyes aligned and auto-reverse tested on the spot.
A new opener is only as good as the door it lifts, so we check the balance first and then match the drive type and motor to that door and that garage. Chain drives are durable and affordable but louder. Belt drives are quieter and need less upkeep, which matters when a bedroom or office sits above the garage. Screw drives use a threaded rod, and direct-drive models have the fewest moving parts.
Installation is more than hanging a motor. The red manual release has to be reachable from the floor, and DASMA's checklist puts the release within six feet of the floor and the wall control at least five feet up, out of a child's reach. The photo-eyes are mounted near the floor on both sides and tested, the travel and force settings are programmed, and the reversal is proven against an obstruction. Many openers now add battery backup and smartphone control, and we set those up as part of the visit.
Times a New Opener Pays Off
- No photo-eyes on either side of the door
- The opener grinds, jerks or runs louder every year
- Parts for your model are no longer available
- A bedroom or office above the garage picks up every cycle
- New remotes will not pair with the old unit
- You want phone control, or a battery that runs the door in an outage
🔥 The North Texas Heat & Hail Factor
Much of the housing in these towns dates from the 1990s and 2000s. The Census Bureau's 2020-2024 figures put the median year built at 1993 in Grapevine, 1994 in Colleyville, 1997 in Southlake and 1999 in Keller, so many original openers are now decades old and have survived a lot of Texas summers. Storm season is the other reason owners upgrade: after a power cut, a heavy door is hard to raise by hand, and a battery unit keeps the door moving. Because the head hangs at the ceiling, where a garage runs hottest, we mount it to the manufacturer's clearances and ask you to keep stored items off the motor housing.
How Each Visit Works
Door and garage check
We confirm the door is balanced and the tracks are straight, then measure headroom and ceiling structure for the rail.
Match the unit
Drive type, motor strength and features are chosen for the door's weight, the noise you can accept and the budget you set.
Install and set
Rail, motor, brackets, wall control, photo-eyes and release handle are fitted to the instructions, and travel and force are programmed.
Test and train
We prove the reversal against an obstruction, pair your remotes and keypad, and show you the manual release.